|
|
|
| |
|
|
MiniTROLL -
Water Level Sensor and Datalogger
The miniTROLL is the world's
most advanced data logging probe. It is completely
self-contained and features an internal data logger
with a pressure/level and a temperature sensor
. It is used by water professionals around the
world to collect real-time information for analysis
of both short- and long-term water level trends. Download
a Brochure
The miniTROLL has been discontinued for sale. It
has been replaced by the LevelTROLL.
We have a few of the MiniTROLL units (used) that
we can sell for a great reduced price. Contact
Us |
|
|
|
| |
|
|
WeatherHawk
- Complete Weather Station
The WeatherHawk® Station
is a low cost option for weather monitoring. It
can be used to monitor air temperature, relative
humidity, dew point, precipitation, solar radiation,
wind speed and direction. All components
come pre-assembled. Simply pull it out of
the box, mount it on the tripod, and turn it on.
No programming, no wiring, no problems!
The WeatherHawk can log
over 60,000 data points. The system is powered
by a rechargeable lead acid battery that can be
recharged using AC or solar power. Download a Brochure
**This is a good quality station for monitoring Weather Trends, but do not RENT this station if you need NIST Data. The sensors on the station have not been precision calibrated.
Contact a Sales Representative to learn more about this station. |
|
|
|
|
|
Campbell
Scientific CR10X - Datalogger Control System
The CR10X-series is a compact, modular line of dataloggers
with a measurement and control module, external power
supply, and keyboard display. Requires a 12 VDC power
supply.
Specifications
- Analog inputs: 12 single-ended or 6 differential,
individually configured
- Pulse counters: 2
- Switched voltage excitations: 3
- Control/digital ports: 8*
- Serial I/O port: 1
- Scan rate: 64 Hz
- Burst mode: 750 Hz
- Analog volt. resolution: to 0.33 uV
- A/D bits: 13
- Programming: Edlog
- Data Storage: Mixed Array, Table
- Telecommunications: PakBus, Modbus, Alert
|
|
|
Campbell
Scientific CR500 - Datalogger Control
System
The CR510 dataloggers are a smaller version of the
popular CR10X dataloggers. They provide a lower-cost
datalogger alternative for measurements of a limited
number of sensors, yet can be used with most of Campbell
Scientifics' telecommunication devices such as cellular
telephones, RF UHF/VHF RF modems, and satellite transceivers.
The CR510-series dataloggers use external power supplies
and keyboard displays. They are not compatible with
multiplexers, SDM devices, or thermocouples. Requires
a 12 VDC power supply.
Specifications
- Analog inputs: 4 single-ended or 2 differential,
individually configured
- Pulse counters: 2
- Switched volt. excitations: 2
- Control/digital ports: 1
- Scan rate: 64 Hz
- Analog volt. resolution: to 0.33 uV
- A/D bits: 13
|
New units of these items are
available for purchase. (except
the MiniTROLL) see the LevelTROLL
|
