Features & Specifications
- Eyelet for easy mounting with cable
ties
- 10-bit resolution
- User-selectable sampling intervals:
1 second to 18 hours
- High and low alarm-indication LEDs
(Pendant Temp only) — user settable levels
and delay options
- Programmable Start time/date or
Trigger Start on-site with magnet
- Waterproof to 30 meters (100 feet)
- 8K or 64K memory options — store
approximately 6.5K or 52K readings
- Battery level indication at launch
- Battery level can be recorded as
separate channel
- Numerous event types (host PC connection,
low battery, magnet presence) stored to data file
during logging
- Data download via Optic USB (IR)
Base Station and Pendant Coupler
- Offload data or check logger status
while logging
- NIST-traceable temperature accuracy
certification available
- Logger size: 5.8 x 3.3 x 2.3 cm
(2.3 x 1.3 x 0.9")
- Weight: 18 grams (0.6 oz)
- Patented technology (U.S. Patent
6,826,664)
HOBO Pendant Temperature Data
Logger
Part # UA-001-xx
Temperature logger with high and low alarm LEDs
Key Specifications
Temperature
• Range: -20° to 70°C
(-4° to 158°F) in air; 0 to 50°C (32° to 122°F)
in water
• Accuracy: 0.47°C (0.85°F)
at 25°C (77°F)
HOBO Pendant Temp/Light Intensity
Data Logger
Part # UA-002-xx
2-Channel logger
Key Specifications
Temperature
• Range: -20° to 70°C
(-4° to 158°F) in air; 0 to 50°C (32° to 122°F)
in water
• Accuracy: 0.47°C (0.85°F)
at 25°C (77°F)
Light Intensity
• Range: 0—30,000 lumens/square-foot
• Designed for indoor, outdoor,
and underwater measurement of relative light levels. For research-grade
light measurements see Onset's PAR or Solar Radiation sensors
for use with the HOBO Micro Station and Weather Station loggers.
Optic USB Base Station/Coupler
The Optic USB Base Station and Pendant
Coupler provide fast optical infrared (IR) communication
for easy logger launch and readout of HOBO Pendant
loggers. The Base Station connects via USB to a host
computer, while the Coupler attaches the logger to
the Base Station for communications.
Optic USB Base Station offloads full 64K logger in 30 seconds or
a full 8K logger in 6 seconds.
Note: The Optic USB Base Station is splash resistant.
Required
Software & Communications Hardware
HOBOware™ for
Windows® software,
an Optic USB Base Station (part # BASE-U-1), and
a Pendant Coupler are required to operate the HOBO® Pendant
loggers. Each software starter kit includes software,
USB interface cable, and software manual. The Optic
USB Base Station includes an Optic Base Station and
Pendant Coupler. |
